Magnum RD2824 2800W, 24V Inverter/charger
The RD Series Inverter/Charger
Models RD2212, RD1824, RD2824, RD3924
Reliable Off-Grid and Backup Power from Magnum Energy
The RD Series Inverter/Charger from Magnum Energy is a new generation inverter designed specifically for renewable energy use. The RD Series is powerful, easy-to-use, and best of all, cost effective. Features include an easy access wiring compartment, four stage temperature compensated battery charger, dual input 50 amp transfer, die cast aluminum base with an aluminum cover for optimum high temperature performance.
Power Factor Corrected (PFC) Charger: The RD series of inverter/chargers use less energy from a generator than standard chargers – using 25-30% less AC current than standard chargers.
Safe and reliable: The RD Series is ETL Listed to the stringent requirements of UL 1741, ensuring that the inverter is safe and reliable.
Easy-to-install: Install the RD Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your power cable (AC) to the inverter’s easy-to reach terminal block, connect the batteries, and switch on the power.
The RD Series Inverter / Charger
You asked and Magnum listened. The RD Series Inverter/Charger is loaded with features:
- Choices: The RD Series comes in four power models and 12 and 24 volt models, allowing you to choose the model that is right for you.
- Versatile mounting: Mount the RD Series on a shelf or wall.
- Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
|Input battery voltage range||9 - 16 VDC||18 - 32 VDC||18 - 32 VDC||18 - 32 VDC|
|Nominal AC output voltage||120 VAC||120 VAC||120 VAC||120 VAC|
|Output frequency and accuracy||60 Hz ± 0.005%||60 Hz ± 0.005%||60 Hz ± 0.005%||60 Hz ± 0.005%|
|1 msec surge current (amps AC)||60||70||100||150|
|100 msec surge current (amps AC)||37||40||60||90|
|5 sec surge power (real watts)||3700||4000||6000||9000|
|30 sec surge power (real watts)||3450||3300||4800||6400|
|5 min surge power (real watts)||3100||2850||3950||5800|
|30 min surge power (real watts)||2400||2400||3500||4750|
|Continuous power output at 25° C||2200 VA||1800 VA||2800 VA||3900 VA|
|Rated input battery current||191.0 ADC||88 ADC||133 ADC||188 ADC|
|Inverter efficiency (peak)||95%||95%||94%||93%|
|Transfer time||16 msecs||16 msecs||16 msecs||16 msecs|
|Search Mode||.2 ADC||.3 ADC||.3 ADC||.3 ADC|
|No Load (120 VAC output)||0.87 ADC||.5 ADC||.6 ADC||.6 ADC|
|Waveform||Modified Sine Wave||Modified Sine Wave||Modified Sine Wave||
Modified Sine Wave
|Continuous output at 25° C||110 ADC||50 ADC||80 ADC||105 ADC|
|Power factor||> 0.95||> 0.95||> 0.95||> 0.95|
|Input current at rated output (AC amps)||15||15||21||29|
|General Features and Capabilities|
|Transfer relay capability||2 legs at 30 A for 120 V/30 A or 240 V/60 A service|
|Five stage charging capability||Bulk, Absorb, Float, Equalize, and Battery Saver™|
|Battery temperature compensation||With available temp sensor (battery temp 0 – 50° C)|
|Remote inverter on/off switch||With available pigtail to connect to dry contact|
|Internal cooling||0 to 120 cfm variable speed drive using dual 92mm brushless DC fans|
|Overcurrent protection||Yes, with two overlapping circuits|
|Overtemperature protection||Yes on transformer, MOSFETS, and battery|
|Conformal coating on PCB’s for corrosion protection||Yes|
|Powder coated chassis & top for corrosion protection||Yes|
|Stainless steel fasteners for corrosion protection||Yes|
|ETL listed to UL1741|
|Operating temperature -20° C to +60° C (-4° F to 140° F)
Nonoperating temperature -40° C to +70° C (-40° F to 158° F)
Operating humidity 0 to 95% RH non condensing
Max operating altitude 15,000’ (4570 m)
|Dimensions (h x w x d) 13.75” x 12.65” x 8.0” (34.9 cm x 32.1 cm x 20.3 cm)
Mounting Shelf or wall (vents up)
Weight 38 lb (17 kg) 38 lb (17 kg) 42 lb (19 kg) 45 lb (20 kg)